Laboratory Oven

 

Ants range of 250°C laboratory ovens comprises three bench-top sized models equipped with the R38 digital PID temperature controller.

Standard features

  • 250°C maximum operating temperature
  • 30, 60 or 120 litres chamber volumes
  • Equipped with the R38 digital PID temperature controller
  • Fan convection for rapid heating & excellent uniformity
  • Chemically resistant stainless steel liner
  • Two adjustable nickel-chrome plated wire shelves
  • Lever latch door & airtight silicone seal
  • Compliant with safety standard BS EN 61010-2-010:2003

 

Options (specify these at time of order)

  • Over-temperature protection (recommended to protect valuable contents & for unattended operation)
  • Digital countdown timer to switch oven off
  • Additional sets of shelves & runners
  • Lockable door
  • Low voltage options for use below 220 V
  • Routine spares kit

Content may be subject to modifications or corrections

Our Standard Models

AX30

Max temp (°C) 250
Min temp (°C) Ambient +30
Temp uniformity (°C) ±5.0 @ 250°C
Heat-up time (mins) 23
Recovery time (mins) 3
Dimensions:

Internal H x W x D (mm)

295 x 300 x 320
Dimensions:

External H x W x D (mm)

440 x 590 x 465
Shelves fitted / accepted 2 / 4
Shelf loading each / total (kg) 10 / 20
Volume (litres) 28
Air changes / hr 65
Max power (W) 1000
Holding power (W) 342
Weight (kg) 24

AX60

Max temp (°C) 250
Min temp (°C) Ambient +30
Temp uniformity (°C) ±5.0 @ 250°C
Heat-up time (mins) 25
Recovery time (mins) 3
Dimensions:

Internal H x W x D (mm)

395 x 400 x 420
Dimensions:

External H x W x D (mm)

540 x 690 x 565
Shelves fitted / accepted 2 / 6
Shelf loading each / total (kg) 10 / 30
Volume (litres) 66
Air changes / hr 28
Max power (W) 1500
Holding power (W) 465
Weight (kg) 37

AX120

Max temp (°C) 250
Min temp (°C) Ambient +30
Temp uniformity (°C) ±5.0 @ 250
Heat-up time (mins) 26
Recovery time (mins) 3
Dimensions:

Internal H x W x D (mm)

495 x 500 x 520
Dimensions:

External H x W x D (mm)

640 x 790 x 665
Shelves fitted / accepted 2 / 8
Shelf loading each / total (kg) 10 / 40
Volume (litres) 128
Air changes / hr 14
Max power (W) 2000
Holding power (W) 622
Weight (kg) 55

Please note:

- Uniformity is measured in an empty chamber with vents closed, after a stabilisation period

- Shelf loadings are based on evenly distributed weight

- Maximum power and heat up times based on a 240V supply

- The uniform volume is smaller than the total chamber volume

- Minimum operating temperature is ambient +30°C

Content may be subject to modifications or corrections

 

  • Metal Retorts - A variety of metal retorts are available for use with this range of furnaces. This type of retort is generally used to cater for the following process conditions: a. To maintain controlled atmospheres within the heated chamber; b. To protect the heating elements and insulation from chemical attack by aggressive volatiles given off by fluxes, acids, etc.
  • Four Sided Heating - This option upgrades the standard two sided heating to four sided heating and is recommended in the following circumstances: For use with metal retorts and ceramic liners; To improve chamber temperature uniformity to meet specific process requirements; To up rate the furnace power to cope with large lo
  • R-Type Thermocouple - This option upgrades the standard K Type (mineral insulated inside Inconel sheath) thermocouple to R-Type thermocouple and is recommended if furnace is going to be used continuously at 1200 C.
  • Over Temperature - This option is recommended to protect valuable contents & for unattended operation.
  • Data Logging & Remote Controllers - A range of sophisticated digital controllers, multi-segment programmers and data loggers is available. These can be fitted with RS232 and RS485.
TOP
CREATE & VIEW TICKETS