Ashing Furnace

The AAF ashing furnace range is designed specifically to provide optimum ashing conditions to ensure complete combustion of the sample.

Standard features

  • 1100 °C maximum operating temperatures
  • Carbolite Gero 301 controller, with single ramp to set-point & process timer
  • Large floor area allows for large numbers of samples
  • Ideal for ashing foods, plastics, coal & other hydrocarbon materials
  • Wire elements are protected from chemical & mechanical damage by a hard wearing alumina based liner
  • 4 sided heating (2 sides, roof & hearth)
  • Air inlet & tall chimney give airflow of 4 to 5 changes per minute
  • Low chamber height holds airflow close to samples for optimum combustion
  • Powerful elements with graded winding compensate for heat loss due to high airflow
  • Preheating of air before it enters the chamber gives excellent uniformity
  • Sample tray and loading handle

Options (specify these at time of order)

  • 2 phase electrical supply
  • Over-temperature protection (recommended to protect valuable contents & for unattended operation)
  • A range of sophisticated digital controllers, multi-segment programmers and data loggers is available. These can be fitted with RS232, RS485 or Ethernet communications

Our Standard Models

AAF 11/3

Max temp (°C) 1100
Heat-up time (mins) 155
Max continuous operating temp (°C) 1000
Dimensions:
Internal H x W x D (mm)
90 x 150 x 250
Dimensions:
External H x W x D (mm)
585 x 375 x 485
Dimensions:
External with door open H x W x D (mm)
800 x 375 x 485
Dimensions: Height to top chimney (mm) 780
Volume (litres) 3
Max power (W) 2100
Holding power (W) 1270
Thermocouple type K
Weight (kg) 22

AAF 11/7

Max temp (°C) 1100
Heat-up time (mins) 155
Max continuous operating temp (°C) 1000
Dimensions:
Internal H x W x D (mm)
90 x 170 x 455
Dimensions:
External H x W x D (mm)
650 x 430 x 740
Dimensions:
External with door open H x W x D (mm)
905 x 430 x 740
Dimensions: Height to top chimney (mm) 1060
Volume (litres) 7
Max power (W) 4000
Holding power (W) 2624
Thermocouple type K
Weight (kg) 63

Please note:
- Holding power is measured at 500°C
- Heat up rate is measured to 100°C below max, using an empty chamber
- Maximum power and heat up times based on a 240V supply

Content may be subject to modifications or corrections

TOP
CREATE & VIEW TICKETS